top of page
Search

HVAC Service Cost Recovery: Use Billable Hours in the Denominator

Oct 15
4 min read
Original teal and warm-cream Nexora cover showing a technician-hour bridge from 2,080 paid hours to 1,280 billable hours.

An HVAC service cost model can look complete while dividing annual costs by hours the business cannot actually bill. Paid leave, training, dispatch support, travel and callbacks all affect the denominator. The same annual cost spread across fewer recoverable hours produces a higher cost per billable hour, even when wage rates and repair durations stay unchanged.


1. Define three different hour totals


Paid hours describe the time covered by payroll under the chosen employment assumptions. Available hours describe time remaining for work after the defined absences. Billable hours describe the portion attributable to customer work under the business’s stated charging convention. Write those definitions beside the calculation; businesses differ in how they recover travel, diagnosis, minimum visits and maintenance-contract work.


Productive activity is broader than billable activity. Training a technician, restocking a van or preparing a service report can be necessary work even when it does not generate a separate invoice line. Conversely, a flat-rate task may contain a standard labor allowance that differs from the actual time spent. Keep actual time, sold task allowances and invoiced amounts in separate fields.


New Zealand’s government capacity and demand guidance distinguishes staff-hour inputs from service outputs, including billable hours in its plumbing example. That distinction is useful for HVAC service planning. This article examines annual cost recovery; it does not measure installed quantities against earned labor-hour norms.


2. Build a complete annual cost pool


For an original teaching model, assume one full-year technician with 2,080 paid hours and an all-in employment cost of 30 CU per paid hour. CU means fictional cost units. The annual technician cost is 2,080 × 30 = 62,400 CU. The rate includes all employment-cost categories selected for this example; no additional burden percentage is added later.


Assume a separately identified annual service-overhead allocation of 33,600 CU, including the chosen share of dispatch, vehicle and administrative costs. It excludes the technician cost already counted. The modeled annual pool is therefore 62,400 + 33,600 = 96,000 CU. Exclude materials, subcontract work, taxes on sales, financing and profit from this demonstration. The result is only a recovery figure for the defined cost pool.


Retain the full paid technician cost even when some paid hours are nonbillable. Multiplying the 30 CU employment rate by billable hours alone would discard the payroll associated with leave, training and other paid time. If a different model transfers that cost into overhead, prove the transfer with a reconciliation and count it once.


3. Reconcile paid hours to billable capacity


  • Paid hours: 2,080 h/year.

  • Defined paid leave and holidays: 240 h/year. Available work time = 2,080 − 240 = 1,840 h/year.

  • Training, meetings, administration and vehicle preparation: 160 h/year.

  • Travel not recovered through billable hours under this example’s convention: 280 h/year.

  • Unrecovered callbacks and other nonbillable service time: 120 h/year.

  • Billable service hours = 1,840 − 160 − 280 − 120 = 1,280 h/year.


The complete reconciliation is 240 + 160 + 280 + 120 + 1,280 = 2,080 hours. Billable utilization is 1,280/1,840 = 69.6% of available work time, or 1,280/2,080 = 61.5% of paid time. Both percentages are correct, but they use different denominators. These inputs are hypothetical; neither percentage is an industry target or a recommended workload.


ServiceTitan’s labor-rate explanation also separates available working time from projected billable hours and allocates overhead over the latter. Apply that denominator principle with a numerator reconciled to your own complete cost records. The present example deliberately retains all 62,400 CU of annual technician cost.


4. Calculate the recovery figure and expose the shortcut


Modeled cost recovery per billable hour = annual cost pool ÷ annual billable hours = 96,000/1,280 = 75 CU per billable hour. Its components are 62,400/1,280 = 48.75 CU for technician employment and 33,600/1,280 = 26.25 CU for allocated overhead. Their sum returns to 75 CU.


Original annual hour reconciliation showing 2,080 paid hours less 240 absence hours, 160 support hours, 280 unrecovered travel hours and 120 callback hours equals 1,280 billable hours; 96,000 cost units divided by 1,280 equals 75 per billable hour.

Original annual teaching example for one technician. CU means fictional cost units. All paid technician cost stays in the numerator; time categories are mutually exclusive.


Dividing by all 2,080 paid hours instead produces 46.15 CU per paid hour, rounded. That is a valid average cost per paid hour, but it does not recover the annual pool over only 1,280 billable hours. Using the unrounded value, 96,000/2,080 × 1,280 = 59,076.92 CU recovered, leaving 36,923.08 CU of the modeled pool uncovered. Rounding should occur after the calculation.


The 75 CU figure is an internal planning output, not a customer selling price. A real pricing decision must also address the excluded costs, service scope, customer terms, risk and commercial objectives. No charge, quote, payment or price-book entry is changed by this educational calculation.


5. Test the denominator without assuming instant savings


Suppose verified scheduling improvements could convert 160 nonbillable hours into billable work, while annual employment and allocated overhead remain 96,000 CU. The scenario then has 1,440 billable hours and a recovery figure of 96,000/1,440 = 66.67 CU/hour. The denominator rises by 12.5%; the cost per billable hour falls by 11.1%. The percentages differ because each compares against a different starting value.


That scenario requires both available work and a genuine reduction in unrecovered time. Reclassifying a timesheet code changes no underlying capacity. Extra demand may require overtime, additional dispatch support or other costs, so rebuild the numerator when those assumptions change. If billable hours instead fall to 1,120 with the same cost pool, the figure rises to 85.71 CU/hour. Neither scenario is a promised outcome.


6. Check the hours against job records


Use a consistent reporting period and mutually exclusive time codes. Reconcile technician timesheets to paid hours, then match customer-work hours to completed job records. For flat-rate work, compare actual task duration with the documented task allowance without pretending the allowance is time physically worked. Review a seasonal full-year view alongside recent months; a busy summer week is a weak basis for annual capacity.


  • Define whether travel and diagnostic time are recovered separately or through task allowances.

  • Keep absence, administration, service work and callback hours from overlapping.

  • Separate costs recovered elsewhere before allocating the service cost pool.

  • Refresh hours and costs together when staffing, demand or service scope changes.


Nexora’s paid HVAC Flat Rate Price Book Template provides an Excel structure for labor-cost inputs, monthly overhead, billable hours and repair-task pricing, with an accompanying guide. It can help make the cost-recovery assumptions visible before building a price book. Confirm how each input is defined and align monthly costs with monthly hours; use qualified professional advice for accounting or actual pricing decisions.



Comments

Rated 0 out of 5 stars.
No ratings yet

Add a rating
bottom of page