top of page

HVAC Basics for Beginners: Follow the Air in One Room

1 day ago
3 min read
Illustrative air-handling unit and insulated or galvanized ductwork in a mechanical room.

Illustrative image. Not a photograph of a Nexora project or a design detail.

A cool room is not proof of adequate ventilation. Follow the air.

An office is cool, but it still feels stuffy. The air conditioner is running and air is coming out of the grille. What, then, is missing? Possibly outdoor air, but a cool room alone does not tell you. To understand the system, start by asking where the air comes from, where it goes, and what happens to it along the way.

HVAC stands for heating, ventilation and air conditioning. Heating adds heat; air conditioning can remove heat and moisture; ventilation manages air exchange and helps control contaminants. One unit does not necessarily do all three. The U.S. Department of Energy HVAC overview introduces the equipment that can perform these separate jobs.

To see how heat and moisture shape cooling and coil duty, explore the Cooling Load Design Handbook.

Read the four arrows on an HVAC drawing

  • Supply air enters the room from the system.

  • Return air leaves the room for the air-handling unit (AHU). Some may be reused; some may leave the building.

  • Outdoor air is deliberately brought in from outside. It may need filtering and conditioning.

  • Exhaust air is deliberately discharged outdoors. A toilet exhaust fan is one familiar example; an AHU may also discharge part of its return air as relief.

In a typical mixed-air AHU, the outdoor stream joins the recirculated portion of return air before the combined stream is conditioned and supplied. Not every system has this arrangement. See the ASHRAE Handbook chapter on ventilation and infiltration for the terminology and a schematic.

One room, two airflow balances

Suppose an AHU supplies 300 L/s to a room and receives 300 L/s back. At the AHU, 60 L/s of the return stream is relieved outdoors and 240 L/s recirculates. The intake replaces the relieved air with 60 L/s of outdoor air.

Supply = recirculated + outdoor = 240 + 60 = 300 L/s.

Outdoor air is therefore 20% of the mixed stream on this simplified, common-density volume basis. The room receives 300 L/s of supply, not 300 L/s of outdoor air. This is a diagram-reading exercise, not a design rate: actual airflow depends on occupancy, space use, the system arrangement and applicable requirements. Leakage, transfer air and separate exhaust can change the balance.

Once you know the design airflow, the HVAC Duct Design and Sizing Handbook helps explore how duct size and resistance change. The airflow balance above does not size the duct by itself.

Is a split AC doing the same thing?

A conventional recirculating wall split cools room air at the indoor unit and rejects heat at the outdoor unit. The refrigerant pipes carry refrigerant, not ventilation air. Unless the equipment specifically provides an outdoor-air path, check how ventilation is handled separately. A central AHU can mix and condition outdoor and return air when configured to do so; the letters “AHU” alone do not guarantee that it does. For another example, read how an AHU is sized.

Try it on your first drawing

Trace a supply grille back to its unit and find a separate outdoor-air intake or ventilation system. Find the return and exhaust arrows, and note the scheduled flow next to each. If a drawing shows no outdoor-air path, ask where it is provided rather than counting all supply air as ventilation.

For a guided learning sequence, start with the HVAC Beginner’s Guide.

Comments

Rated 0 out of 5 stars.
No ratings yet

Add a rating
bottom of page