top of page


Parallel AHU Filters: Calculate Flow Redistribution When Bank Resistances Differ
A bank delivering its scheduled total airflow can still send too much air through individual filters. Solve equal pressure drop and total flow together before accepting a mixed-resistance bank.
Oct 235 min read


AHU Sensor Time Alignment: Separate Air-Transport Delay from Sensor Lag
Two temperature readings with the same timestamp may describe different air histories. Separate travel time, sensor response and logging delays before diagnosing an AHU from a transient.
Oct 235 min read


Wraparound Heat Pipes: Separate Coil Duty from Recovered Heat
A four-state heat balance shows why wraparound precool and reheat cannot be counted twice, and why cooling-coil duty differs from cooling delivered to rooms.
Oct 215 min read


Dry Cooling-Coil UA Trending: Separate Temperature Driving Force from Deterioration
A lower cooling-coil kW reading does not establish deterioration. Normalize the driving temperature and confirm both flows before using an apparent UA trend.
Oct 215 min read


Condensate Pump Selection: Duty Flow Is Not Shutoff Head
A maximum-lift label does not establish useful pumping capacity. Calculate the operating flow, then check inflow, cycling, discharge routing and overflow protection.
Oct 114 min read


Is Your AC Bad, or Are Your Ducts Just Dumb? The Rise of Smart HVAC Systems Beyond the Thermostat
A cold coil does not guarantee a comfortable room. Learn how to distinguish AC equipment faults from duct-distribution problems—and how properly designed smart HVAC systems control airflow, capacity and comfort beyond a single thermostat.
Sep 89 min read
bottom of page