top of page
HVAC
Practical HVAC design, equipment, controls, energy and refrigerant guidance.


Balancing Damper Pressure Loss: Calculate the Required Branch Resistance
A balancing damper absorbs the pressure left over on a noncritical branch. Calculate its required loss at the branch flow before selecting a setting or adding fan pressure.
Oct 94 min read


Coincident Cooling Loads: Why the Block Peak Is Not the Sum of Zone Peaks
A building’s zone peaks do not usually occur together, and its cooling-coil peak can occur at another hour. A worked example shows which loads to add and which equipment boundary to check.
Oct 94 min read


VAV Minimum Pressure and Low-Flow Signal: Two Separate Checks
A VAV terminal can have enough inlet pressure and still measure its minimum airflow poorly. Check the pressure budget and sensor signal separately before changing fan pressure.
Oct 94 min read


Parallel Fan-Powered VAV: Separate Primary and Discharge Airflow
A heating-mode diffuser reading includes both primary and locally recirculated air. Use the right flow for the controller, coil, fan and downstream pressure calculation.
Oct 94 min read


Duct Cross-Talk: Why You Hear Conversations Through Vents
Hearing the next room through a vent calls for a targeted acoustic investigation. Learn how to find the speech path, choose a suitable treatment and verify privacy alongside airflow.
Oct 45 min read


Bad HVAC Sensors and Forgotten Overrides That Waste Energy
A plausible reading can still drive the wrong HVAC response. Check sensor accuracy and placement, trace points to the right equipment, and return justified temporary overrides to verified automatic control.
Oct 45 min read


After-Hours HVAC Waste: A One-Week Schedule Audit
Compare occupancy with actual equipment operation in a focused one-week audit. Check schedules, overrides and optimal start, protect required services, and measure the result honestly.
Oct 45 min read


Simultaneous Cooling and Reheat: Finding Avoidable HVAC Waste
Comfortable rooms can conceal excess reheat. Follow the air path, separate necessary dehumidification from control faults, and verify valves, minimum airflow and temperature reset before changing settings.
Oct 45 min read


Ductwork Popping at Startup: Pressure or Thermal Movement?
A duct bang at blower startup needs different evidence from a tick during warm-up. Follow a focused investigation of panel movement, local pressure, thermal restraint and repair verification.
Oct 45 min read


Air Balancing (TAB) Toolkit: From Site Readings to a Clear Report
Bring air-side TAB readings, instrument records, tolerance checks and deficiencies into one reporting workflow with Nexora’s Excel workbook and 20-page pocket field handbook.
Oct 35 min read


HVAC RFI Pack for Clearer Questions and Better Tracking
Prepare clearer HVAC RFIs and keep their progress visible with one editable workbook, including a 500-row register, printable form, dashboard and 64 questions to adapt.
Oct 25 min read


HVAC Maintenance Checklist Pack: Ready-to-Use PPM Checklists for Chillers, AHUs, FCUs, VRF & More
Stop writing HVAC maintenance checklists from scratch. Ready-to-use daily to annual PPM checklists for chillers, cooling towers, AHUs, FCUs, pumps, fans, VRF and packaged units, in print-ready PDF and editable Excel.
Sep 303 min read
bottom of page